Onspec Silicon

Flooring and Floor Mats

admin — Fri, 06 Apr 2012 00:36:53 +0000

The least you are able to do for your kitchen area staff is provide a bit of cushioning for the long hours they spend on their feet. Kitchen mats, when correctly selected and utilized, provide traction for employees, minimize accidental breakage, and keep floors cleaner as well.

Rubber mats are arguably the most pleasant, but the longest-wearing mats contain nylon cords melded towards the rubber. You are able to also buy mats created of neoprene rubber (the same material wetsuits are created of), solid vinyl, and sponge vinyl.

Beveled or tapered edges provide an extra measure of security against tripping and are useful in heavy-traffic areas or if you’re rolling carts. The mats should not be tough but textured, which forces people to change posture when standing on them for long time periods. Prior to you purchase mats, decide exactly where you will put them.

Kitchen area mats are usually three foot squares that may interlock, between 1/2 and 5/8 inches thick. Thicker mats provide more cushioning but thinner ones are easier to clean. There are specific grease-proof mats for areas near fryers, grills, and griddles; slightly raised bar mats, which drain spilled liquid beneath them to prevent slipping; and vinyl loop pile mats for kitchen entrances and exits, which can be specially treated to make them germ-, mold-, and mildew-resistant.

For public entrances, mats are only 1/4 inch thick (so individuals won’t trip on them) and should be capable to trap incoming snow, ice, moisture, or mud. Your logo or a welcoming message could be emblazoned on the mat. If it is going to be placed over a carpeted surface, molded nubs on the bottom side from the mat will grip and adhere to the carpet.

Slippery floors are a security issue in every kitchen, but mats will improve employee comfort, and, in dish rooms, they’ll minimize breakage of dishes and glassware. Where wet floors are a persistent problem, as in dish rooms, you also can maintain a fan blowing directly onto the ground, and require that workers in these areas wear shoes with nonskid soles.

Slip-resistant shoe requirements are becoming increasingly typical in food service, as a way to maximize usage and reduce the restaurant owners’ liability. Some buy the shoes for their employees as part of their uniforms; others spell out appropriate footwear styles and have discipline policies for those who show up repeatedly without the correct footwear.

It’s essential simply because it can decrease the number of slip-and-fall accidents by 70 to 80 percent.Even with protective mats, it is the manager’s responsibility to see that floors are cleaned often. Today’s mats are light, weighing three to five pounds apiece, for simple lifting and cleaning. They can be taken outdoors to a loading dock or back parking lot and hosed down with high-pressure drinking water and cleaning fluid that melts the grease buildup.

Or you can use a motorized floor scrubber/vacuum (occasionally called a wet-vac), which has rotary brushes and uses hot water and detergent to loosen grime from mats and floors and then whisks away most of the moisture with an absorbent squeegee located at the back of the machine. The floor covering you select will go a long way toward ensuring a safe working environment. You’ll hear the term aggregate to describe nonskid ground surfaces.

This means something additional has been added, generally to a top or second layer of the ground material, to give it a lot more friction. It may be fine sand, clay, tiny bits of gravel or metal, carborundum chips, or silicon carbide. Among veterans, unglazed quarry tile is the undisputed favorite. Quarry tile contains bits of ceramic (usually carborundum chips), clay, and/or silicon carbide for slip resistance. Even when it wears down in a high traffic area, it maintains its skid-proof quality.

Quarry tile ought to be at least 3/8-inch thickness; in locations with heavy foot visitors or where appliances are frequently rolled, a 1/2-inch or 3/4-inch thickness is favored. The tile is only part of the puzzle, nevertheless. It should be grouted into location, and that grout should be able to withstand significant differences in pressure, temperature, and moisture as well as exposure to grease and chemicals.

The recommendation is a so-called thickset mud bed, utilizing either an epoxy or even a special cement with latex added for elasticity. Epoxy is generally regarded a lot more resilient, but either kind of grout is susceptible to deterioration if it is constantly wet. The tile is laid onto a setting bed of cement, which should be sloped toward the floor drains.

This facilitates steam or pressure cleaning, and keeps water from standing beneath the tiles and damaging the floor over time. An additional option is really a one-piece ground, poured all at once and created of epoxy, polyester, urethane, or magnesite cement. This can also be called a monolithic floor. An epoxy composite ground consists of several layers:

the epoxy or resin, then an intermediate sealer layer, an aggregate layer to create the ground slip-resistant, along with a clear finish (also epoxy) to seal the ground. The resulting ground is 3/16 to 1/4 inches thick and can withstand extreme temperatures around fryers and other cooking equipment. An epoxy composite ground is roughly half the strength of a quarry tile ground, but its chief advantage is that it is seamless-there is no grout to clean or maintain.

It is skid- and scuff-resistant, resilient, and unharmed by moisture, food spills, acidic substances, and also the like. Epoxy is also simple to repair-just grind down the worn or damaged part and pour a new layer there. Composite sheet vinyl is another kind of seamless flooring, laid in sheets on a bare ground having a layer of adhesive.

For food service applications, an additional top layer of aggregate is mixed with the vinyl for slip resistance. Heat welding is utilized to seal the perimeter from the sheets onto the ground. Sheet vinyl is attractive, resilient, and has superb resistance to moisture and food acids. It is superior for use in wet locations, although this kind of floor is susceptible to scratches, dents, and some stains. Today’s sheet vinyl comes in all kinds of funky colors and patterns that mimic everything from wood to slate to jungle prints, so it is suitable for frontof-house locations too as kitchens.

Hubbelite is a compound mixture of cement, copper, limestone, magnesium, and a few other points. It is 1/2-inch thick, strong, slip-resistant, and comfortable to walk on, and gaining popularity in remodels because it can be installed over any existing ground kind, including quarry tile. Hubbelite has superb stain and moisture resistance, and also the addition of copper and magnesium makes it somewhat insect-repellent and prevents bacteria and mold growth.

Cleaning it is also simple; just mop it. The downsides are that Hubbelite comes in only one color, brick red, and that you should choose an installer who is familiar with the product to do a good job with it. Ceramic tile could be used for both floors and walls, in kitchens or dining locations. It is resilient and decorative, and its use can immediately bestow charm and character or add artsy, ethnic touches to any space.

Commercial-grade tile is generally baked clay, covered with a glaze to create it sturdier. New technologies has given new life to this ancient material, with many a lot more varieties, colors, styles, and patterns of tile readily available. It’s easy to thoroughly clean, too, with soap and water.

The a lot more stylish and decorative the tile, the a lot more costly it will be, so budget-minded restaurateurs may opt for tile only on half-walls, some countertops, or as accents in display kitchens. The lowest-cost types of flooring are vinyl tile and sealed concrete. Vinyl tile is considered fairly higher maintenance and does not offer maximum traction or heat resistance, even though it is easy to install and thoroughly clean.

We’d recommend it only for use in dry storage locations, never in food prep or dish washing areas. In some jurisdictions, health regulations don’t permit its use for commercial food service. A concrete floor sealed having a water-based epoxy coating is really a good choice. Be certain the dry thickness from the coating is 1.5 to 2.five millimeters. Whether you choose vinyl, tile, or a one piece poured ground, it’s critical that it be properly bonded towards the concrete slab beneath it.

This is called “curing” the floor, and if it is not done correctly, the ground will eventually crack. No artificial curing agents or sealers ought to be used. They’ll destroy the adhesives utilized to set the ground and maintain it in place. For public spaces, terrazzo flooring is an attention-getting option. Terrazzo begins having a extremely durable cement or epoxy base, into which chips of granite, marble, tile or even seashells might be mixed.

It can be pricey and it takes a lengthy time to install, but it’s resilient and very attractive. Hardwood floors are a well-liked choice in dining areas, and technologies has produced a lot more durable products and finishes than ever before. Recognized as engineered wood items (EWP), these materials also are considered environmentally friendly because they are made from scrap wood.

Softer woods, for example white pine, do show their age-and that’s exactly why some designers select them, to take on a pleasant, worn look with use. Mats or region rugs can be used for especially high-traffic spots. Cleaning is really a simple routine of sweeping, dust mopping, and vacuuming; the precaution here is to use cleaning items formulated for wood floors.

Avoid products created for dusting wooden surfaces-they’ll only make a floor slippery. Carpeting isn’t an option in the kitchen, but in dining locations, beautiful carpet can make a lasting impression. Worn and soiled carpets, however, can make an equally strong impression: that the location is dirty and also the staff is inattentive at greatest, oblivious at worst.

Actually, dust mites, fungi, and bacteria can live and thrive in carpets that aren’t well cared for. In busy commercial settings, it’s probably greatest to install carpet by the roll rather than squares-fewer edges to lift up and cause people to trip. Carpet has a definite life cycle and will require to become replaced periodically, but it’s frequently preferred in dining locations for its ability to suppress noise.

Why LifeCell Wrinkle Cream Can Make Your Wrinkles Disappear Instantly

admin — Fri, 06 Apr 2012 00:11:50 +0000

Is LifeCell Wrinkle Cream Just Another Over-Hyped Skin Product?

How many times have you heard a skin cream claim to deliver instant results? Almost always, if the claims are true, results are only temporary. Skin firming creams often contain ingredients that will temporarily give your face a lift by firming the skin and disguising wrinkles. LifeCell wrinkle cream is different – it provides temporary results for instant gratification while simultaneously going to work on long-term skin benefits.

Silicon dioxide is the magical ingredient contained in LifeCell that allows it to cause wrinkles to disappear from sight within 60 seconds of its application. In less than 1 minute your wrinkles will fade from existence – allowing you to go out for a night on the town, attend a class reunion with old friends or just go to the grocery store with complete confidence in yourself and the way you look. The wrinkle-fading effects of the cream will last right up until you cleanse your face.

How Does Silicon Dioxide Make Your Wrinkles Invisible?

First of all, this super-advanced skin care ingredient is not cheap. But, the makers of LifeCell didn’t want to cut any corners when it came to developing the best anti-aging formula available. Existing in the form of microscopic, 3-dimensional crystals – literally billions of them – silicon dioxide is able to trick the eyes and make your wrinkles disappear from sight.

This works so well because the human eye is not capable of actually seeing a wrinkle. Instead, it sees the shadows created by wrinkles. Because LifeCell cream contains billions of these light-reflecting crystals, no shadows can appear on your face. And no shadows means your wrinkles cannot be seen.

Of course, this wrinkle disappearing act is temporary and will end when you wash your face in the evening. However, when you need to look great in a hurry, you just can’t beat what this product will do for your appearance. As you can imagine, if your wrinkles disappear, you’ll look younger instantly. In fact, you could almost compare this improvement to wearing make-up. And when make-up and LifeCell are combined, you can expect amazing results.

LifeCell Skin Cream Offers Long-Term Anti-Aging Benefits Too

Most people like instant benefits but also want more – a lot more. Luckily, LifeCell delivers numerous long-term anti-aging benefits as well. It contains several powerful age-fighting ingredients that go to work reducing wrinkles permanently, increasing firmness in sagging skin, and lightening discolored skin. In addition, skin issues such as crow’s feet, dark circles under the eyes, under-eye puffiness, fine lines and feathering around the mouth and thinning lips are among the many signs of aging addressed by LifeCell wrinkle cream.

Amorphous and Crystalline Silicon Solar Panels – What to Choose

admin — Fri, 06 Apr 2012 00:10:49 +0000

There are two types of solar panels at the moment. The first type is the crystalline silicon panel. Crystalline solar panels are created with a regulated lattice repeating structure. The huge advantage of this technology is that crystalline solar energy panels are very efficient due to their repeating structure.

Amorphous solar energy panels are built in a different manner. They do not have a crystal structure, and much like glass or obsidian have silicon atoms frozen randomly. The advantage of amorphous solar energy panels is that they are a lot cheaper to produce. Because the crystals are created randomly, it is a lot quicker to grow them.

Both these technologies have their drawbacks too. Crystalline solar panels are expensive to produce because it takes a lot of time for the crystal to be grown according to the pattern. Amorphous panels are a lot cheaper to produce, but they also produce power at a slower rate because they do not the advantage of a pattern.

A few companies are experimenting with hybrids between these two technologies. Sanyo for example has created a solar energy panel that uses both crystalline and amorphous silicon in order to increase efficiency. While this technology is still experimental and very expensive, there has been a huge increase in efficiency as the crystalline silicon uses part of the available sunlight and the amorphous silicon uses the rest.

When making the decision about what type of solar energy panels you should consider your needs. Amorphous silicon solar energy panels are less efficient but they are a lot cheaper. So if you want to simply save some money in the long run this is the choice for you. If you want to go completely off the grid, then you should go with crystalline solar panels as they are a lot more efficient although expensive.